Use the iot-application command to configure the IoT functionality for the AP3912i and AP3916ic. The iot-application command is accessible from within the ap:<serial> context of the CLI.
ibeacon | Configuration mode for the Internet of Things (IoT) functionality. Ibeacon is the only supported mode in v10.31. |
The IoT functionality is supported on the AP3912i and AP3916ic only. Enable iot-admin before issuing this command.
The following example configures the ibeacon mode for the IoT functionality on an AP3916ic.
EWC.extremenetworks.com:ap:1254Y-3211230000#iot-application ibeacon