Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

channel_plan

Use the channel_plan command to customize the channel plan for the Wireless AP‘s Radio 1. The channel_plan command is accessible from all radio dcs contexts of the CLI.

The parameters available in the channel_plan command are determined by the setting of the mode command in the same radio context.

Syntax: <ap_type> and <serial> radio1

channel_plan all-non-dfs | all | extended-channel-with-weather-channel | channel[, channel]

Parameters

all-non-dfs Radio 1 uses all non-DFS channels.
all Radio 1 uses all channels
extended-channel-with-weather-channel Weather radar channels are included. (Supported in Europe only.)
  • The weather channel includes 5600-5650MHz sub-bands and requires a 10-minute listening period before the AP can provide wireless service. During the listening period, the Current Channel field for DFS channels displays the value DFS Timeout, and the weather channel fields display DFS Timeout 10 minutes.
channel[, channel] Radio 1 uses the channels that are listed, separated by commas.

Syntax: (<ap_type> and <serial> radio2)

channel_plan auto | 3-channel | 4-channel | channel[, channel]

Parameters

auto Radio 2 uses 3 channels for countries supporting 11 channels and 4 channels for countries supporting 13 channels.
3-channel Radio 2 uses 3 channels.
4-channel Radio 2 uses 4 channels.
channel [, channel] Radio 2 uses the channels that are listed, separated by commas.

Examples

The following example shows the channel plan for Radio 1 is configured to include all non-DFS channels:

EWC.extremenetworks.com:ap:defaults:ap37xx:radio1:dcs# channel_plan all-non-dfs

The following example shows that the channel plan for radio 1 is customized to include channels 1, 2 and 3:

EWC.extremenetworks.com:ap:defaults:ap37xx:radio2:dcs# channel_plan 1, 2, 3
Published March 2017prev | next

Email this topicEmail this topic

Print this pagePrint this page