About this task
Connect the cables after you have installed the transceiver.
Procedure
-
Remove the protective covers
from the transceiver and from the connectors on each end of the cable.
-
Insert the cable connector into the transceiver connector until it clicks into
place.
-
Plug the other end of the cable into the appropriate port on the other
device.
Some fiber-optic cables can be
terminated at the other end with two separate connectors, one for each
fiber-optic strand. In this case, ensure that the transmit fiber-optic strand
from the appliance is connected to the receive port of the other device, and the
receive fiber-optic strand on the appliance is connected to the transmit port of
the other device.
-
If a transceiver port is unused, cover the port using a dust cover.
Warning
Fiber-optic transceivers use Class 1 lasers. Do not use
optical instruments to view the laser output. The use of optical instruments
to view laser output increases eye hazard. When viewing the output optical
port, power must be removed from the network adapter.
