Configure Tunnel Policy

Use this optional procedure to configure a tunnel policy that points to your Tunnel Concentrator service(s). If you want Layer 2 roaming, you can use the policy to quickly provision Tunnel Concentrator across multiple user profiles in different SSIDs.

Note

The Tunnel Policy is not a mandatory configuration as you can assign a Tunnel Concentrator service to a user profile directly.

On ExtremeCloud IQ (Classic), go to Configure > Common Objects > Network > Tunnel Policies.
Do one of the following:
- Select an existing tunnel policy.
- Select (Add) to create a new tunnel policy.
Enter a Name for the policy.
Select Tunnel Concentrator.
Assign one or more Tunnel Concentrator services to provide the tunnel destination for this profile:
- Primary (Required)—Assign a service that will provide the primary tunnel destination for this profile.
- Secondary (Optional)—Assign a different service as secondary tunnel.
- Tertiary (Optional)—Assign a third service as tertiary tunnel.
Note
Optionally, you can select the (Add) icon to open a Tunnel Concentrator service configuration window where you can configure a new service that gets applied to the corresponding tunnel destination for the tunnel policy.
Select Save.

Tip

Assign this Tunnel Policy configuration to one or more user profiles to use the Tunnel Destination settings from this configuration in those user profiles.