Network Time

System administrators can configure network time and add NTP servers. Go to Administration > System > Network Time.

Table 1. Network Time Settings
FieldDescriptions
System TimeDisplays the current system date and time.
Configured Time ZoneDisplays the current time zone setting.
Set New Time ZoneTo set a new time zone, from the drop-down, select a new time zone and then selevt Save to manually change the system date and time.
NTPSelect this option to configure servers for Network Time Protocol (NTP). NTP is an Internet Standard Protocol that assures accurate synchronization to the millisecond of computer clock times in a network of computers.
NTP ReachableAn icon indicates if the NTP server is reachable: For example,
  • A green icon indicates that the server is reachable.
  • A red icon indicates that the server is not reachable. Check your NTP server settings.
NTP Server 1Enter the IPv4 address or fully qualified domain name of the primary NTP server.
NTP Server 2Enter the IPv4 address or fully qualified domain name of the secondary NTP server.

Select Save to save updates to the settings.

9039470-00 Rev.AA