Additing Editing Transform Set

About this task

You can add a new transform set or edit an existing transform set configuration.

Procedure

  1. Click Add to define a new transform set configuration, Edit to modify an existing configuration, or Delete to remove an existing transform set.
    Click to expand in new window
    Profile Security - VPN Transform Set Create/Modify Screen
    GUID-F75AB245-AF4D-4DC5-AC84-AF828E0FCB37-low.png
  2. Define the following settings for the new or modified transform set configuration:

    Name

    If you are creating a new transform set, define a 32-character maximum name to differentiate this configuration from others with similar attributes.

    Authentication Algorithm

    Set the transform sets‘s authentication scheme used to validate identity credentials. Use the drop-down menu to select either HMAC-SHA, HMAC-MD5, sha256-hmac or aes-xcbc-mac. The default setting is HMAC-SHA.

    Encryption Algorithm

    Set the transform set encryption method for protecting transmitted traffic. Options include DES, 3DES, AES, AES-192, and AES-256. The default setting is AES-256.

    Mode

    Select either Tunnel or Transport as the IPSec tunnel type used with the transform set. The Tunnel option is used for site-to-site VPN and Transport is used for remote VPN deployments. The default setting is Tunnel.
  3. Click OK to save the changes made in the Transform Set screen.

    Click Reset to revert to the last saved configuration.

9036513-00 Rev AA