The access point Inventory tab displays granular data on devices
managed by the selected access point. Information is displayed in easy to read
tables and graphs.
To review the access point's
inventory of connected devices:
Procedure
Select the
Inventory tab.
The selected access point's inventory screen
displays.
Access Point Screen - Inventory Tab
Review the following access
point invemtory information:
The Radios
Type field displays the total number of radios
utilized by this access point. The graph lists the number of radios
in both the 2.4 GHz and 5 GHz radio bands. Refer to the Total Radios
column to review the number of managed radios.
Additionally, use the bar graphs to assess the number WLANs utilized
by supported radio bands.
Periodically select Refresh (at the bottom of the screen) to update the
radio information.
The WLAN
Utilization table displays the top 5 WLANs utilized
by this access point in respect to client support. The first table
lists the total number of WLANs managed by this system. The second
table lists the top five (5) WLANs in terms of the usage percentage
along with their name and network identifying SSID. The utilization
index measures how efficiently the RF medium is utilized. It is
defined as a percentage of the current throughput relative to the
maximum throughput possible.
The quality is measured as:
0-20 – Very low utilization
20-40 – Low utilization
40-60 – Moderate utilization
60 and above – High utilization
Periodically select Refresh (at the bottom of the screen) to update
WLAN utilization information.
The Wireless
Clients table displays information about the wireless
clients managed by the selected access point. Information is
presented in two (2) tables and a graph. The first table lists the
total number of clients managed by the listed access point. The
second lists the top five (5) radios in terms of the number of
connected clients. The graph just below the table lists the number
of clients by radio type.
