efa tenant service bgp peer create --name <bgp-peer-name> --tenant <tenant-name> --ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn> --ipv4-uc-nbr-bfd <device-ip,vrf-name:neighbor-ip,true|false> --ipv4-uc-nbr-default-originate <device-ip,vrf-name:neighbor-ip,true/false> --ipv4-uc-nbr-default-originate-route-map <device-ip,vrf-name:neighbor-ip,route-map>
efa tenant service bgp peer update --name <bgp-peer-name> --tenant <tenant-name> --operation peer-add --ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn> --ipv4-uc-nbr-bfd <device-ip,vrf-name:neighbor-ip,true|false> --ipv4-uc-nbr-default-originate <device-ip,vrf-name:neighbor-ip,true/false> --ipv4-uc-nbr-default-originate-route-map <device-ip,vrf-name:neighbor-ip,route-map>
Note
ipv4-uc-nbr-default-originate-route-map is an optional attribute.efa tenant service bgp peer create --name ten1bgppeer1 --tenant ten1 --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.40,50000 --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.40,true --ipv4-uc-nbr-default-originate 10.20.246.15,ten1vrf1:10.20.30.40,true --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.40,50000 --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.40,true --ipv4-uc-nbr-default-originate 10.20.246.16,ten1vrf1:10.20.30.40,true --ipv4-uc-nbr-default-originate-route-map 10.20.246.16,ten1vrf1:10.20.30.40,rmap1 efa tenant service bgp peer update --name ten1bgppeer1 --tenant ten1 --operation peer-add --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.50,50000 --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.50,true --ipv4-uc-nbr-default-originate 10.20.246.15,ten1vrf1:10.20.30.50,true --ipv4-uc-nbr-default-originate-route-map 10.20.246.15,ten1vrf1:10.20.30.50,rmap2 --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.50,50000 --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.50,true --ipv4-uc-nbr-default-originate 10.20.246.16,ten1vrf1:10.20.30.50,false efa tenant service bgp peer show --detail ======================================================================= Name : bgp173-2501 Tenant : tenant11 State : bgp-peer-created Description : Static Peer ----------- Device IP : 10.20.246.23 VRF : v1 AFI : ipv4 SAFI : unicast Remote IP : 10.40.40.252 Remote ASN : 6500 Next Hop Self : false Update Source IP : BFD Enabled : true BFD Interval : 0 BFD Rx : 0 BFD Multiplier : 0 MD5 Password : $9$MCgKGaNt6OASX68/7TC6Lw== Remove Private AS : false Default Originate : false Default Originate Route Map : Prefix List In : Prefix List Out : Route Map In : tt Route Map Out : rmap1 Dev State : provisioned App State : cfg-in-sync Device IP : 10.20.246.23 VRF : v1 AFI : ipv6 SAFI : unicast Remote IP : fd40:4040:4040:1::fe Remote ASN : 6500 Next Hop Self : false Update Source IP : BFD Enabled : true BFD Interval : 0 BFD Rx : 0 BFD Multiplier : 0 MD5 Password : $9$MCgKGaNt6OASX68/7TC6Lw== Remove Private AS : false Default Originate : false Default Originate Route Map : Prefix List In : Prefix List Out : Route Map In : rmap1 Route Map Out : Dev State : provisioned App State : cfg-in-sync Dynamic Peer ----------- 0 Records =======================================================================
Rack1-Device1# show running-config router bgp router bgp local-as 4200000000 capability as4-enable fast-external-fallover neighbor 10.20.20.4 remote-as 4200000000 neighbor 10.20.20.4 next-hop-self address-family ipv4 unicast network 172.31.254.46/32 network 172.31.254.123/32 maximum-paths 8 graceful-restart ! address-family ipv4 unicast vrf ten1vrf1 redistribute connected neighbor 10.20.30.40 remote-as 50000 neighbor 10.20.30.40 default-originate neighbor 10.20.30.40 bfd neighbor 10.20.30.50 remote-as 50000 neighbor 10.20.30.50 default-originate route-map rmap2 neighbor 10.20.30.50 bfd maximum-paths 8 ! address-family ipv6 unicast ! address-family ipv6 unicast vrf ten1vrf1 redistribute connected maximum-paths 8 ! address-family l2vpn evpn graceful-restart ! ! |
Rack1-Device2# show running-config router bgp router bgp local-as 4200000000 capability as4-enable fast-external-fallover neighbor 10.20.20.5 remote-as 4200000000 neighbor 10.20.20.5 next-hop-self address-family ipv4 unicast network 172.31.254.46/32 network 172.31.254.176/32 maximum-paths 8 graceful-restart ! address-family ipv4 unicast vrf ten1vrf1 redistribute connected neighbor 10.20.30.40 remote-as 50000 neighbor 10.20.30.40 default-originate rmap1 neighbor 10.20.30.40 bfd neighbor 10.20.30.50 remote-as 50000 neighbor 10.20.30.50 default-originate neighbor 10.20.30.50 bfd maximum-paths 8 ! address-family ipv6 unicast ! address-family ipv6 unicast vrf ten1vrf1 redistribute connected maximum-paths 8 ! address-family l2vpn evpn graceful-restart ! ! |
Note
For information about commands and supported parameters to configure default-originate attribute, see Extreme Fabric Automation Command Reference, 2.6.0 .