Extreme Fabric Automation Administration Guide

Run the following command to create a BGP Peer on a tenant VRF:

efa tenant service bgp peer create --name <bgp-peer-name> --tenant <tenant-name> 
                   --ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn> 
                   --ipv4-uc-nbr-bfd <device-ip,vrf-name:neighbor-ip,true|false> 
                   --ipv4-uc-nbr-remove-private-as <device-ip,vrf-name:neighbor-ip,true|false>

Run the following command to update a BGP Peer on a tenant VRF:

efa tenant service bgp peer update --name <bgp-peer-name> --tenant <tenant-name> 
                   --operation peer-add
                   --ipv4-uc-nbr <device-ip,vrf-name:neighbor-ip,remote-asn> 
                   --ipv4-uc-nbr-bfd <device-ip,vrf-name:neighbor-ip,true|false> 
                   --ipv4-uc-nbr-remove-private-as <device-ip,vrf-name:neighbor-ip,true|false>

Example:

efa tenant service bgp peer create --name ten1bgppeer1 --tenant ten1 
                   --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.40,50000 
                   --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.40,true 
                   --ipv4-uc-nbr-remove-private-as 10.20.246.15,ten1vrf1:10.20.30.40,true 
                   --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.40,50000 
                   --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.40,true 
                   --ipv4-uc-nbr-remove-private-as 10.20.246.16,ten1vrf1:10.20.30.40,true
efa tenant service bgp peer update --name ten1bgppeer1 --tenant ten1 
                   --operation peer-add 
                   --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.50,50000 
                   --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.50,true 
                   --ipv4-uc-nbr-remove-private-as 10.20.246.15,ten1vrf1:10.20.30.50,true 
                   --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.50,50000 
                   --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.50,true 
                   --ipv4-uc-nbr-remove-private-as 10.20.246.16,ten1vrf1:10.20.30.50,false


efa tenant service bgp peer show --detail
=======================================================================
Name             : bgp173-2501
Tenant           : tenant11
State            : bgp-peer-created
Description      :

Static Peer
-----------
        Device IP                   : 10.20.246.23
        VRF                         : v1
        AFI                         : ipv4
        SAFI                        : unicast
        Remote IP                   : 10.40.40.252
        Remote ASN                  : 6500
        Next Hop Self               : false
        Update Source IP            :
        BFD Enabled                 : true
        BFD Interval                : 0
        BFD Rx                      : 0
        BFD Multiplier              : 0
        MD5 Password                : $9$MCgKGaNt6OASX68/7TC6Lw==
        Remove Private AS           : false
        Default Originate           : false
        Default Originate Route Map :
        Prefix List In              :
        Prefix List Out             :
        Route Map In                : tt
        Route Map Out               : rmap1
        Dev State                   : provisioned
        App State                   : cfg-in-sync

        Device IP                   : 10.20.246.23
        VRF                         : v1
        AFI                         : ipv6
        SAFI                        : unicast
        Remote IP                   : fd40:4040:4040:1::fe
        Remote ASN                  : 6500
        Next Hop Self               : false
        Update Source IP            :
        BFD Enabled                 : true
        BFD Interval                : 0
        BFD Rx                      : 0
        BFD Multiplier              : 0
        MD5 Password                : $9$MCgKGaNt6OASX68/7TC6Lw==
        Remove Private AS           : false
        Default Originate           : false
        Default Originate Route Map :
        Prefix List In              :
        Prefix List Out             :
        Route Map In                : rmap1
        Route Map Out               :
        Dev State                   : provisioned
        App State                   : cfg-in-sync

Dynamic Peer
-----------
        0 Records
=======================================================================

Verify the switch configuration on the SLX device.

Rack1-Device1# show running-config router bgp router bgp local-as 4200000000 capability as4-enable fast-external-fallover neighbor 10.20.20.4 remote-as 4200000000 neighbor 10.20.20.4 next-hop-self address-family ipv4 unicast network 172.31.254.46/32 network 172.31.254.123/32 maximum-paths 8 graceful-restart ! address-family ipv4 unicast vrf ten1vrf1 redistribute connected neighbor 10.20.30.40 remote-as 50000 neighbor 10.20.30.40 remove-private-as neighbor 10.20.30.40 bfd neighbor 10.20.30.50 remote-as 50000 neighbor 10.20.30.50 remove-private-as neighbor 10.20.30.50 bfd maximum-paths 8 ! address-family ipv6 unicast ! address-family ipv6 unicast vrf ten1vrf1 redistribute connected maximum-paths 8 ! address-family l2vpn evpn graceful-restart ! !	Rack1-Device2# show running-config router bgp router bgp local-as 4200000000 capability as4-enable fast-external-fallover neighbor 10.20.20.5 remote-as 4200000000 neighbor 10.20.20.5 next-hop-self address-family ipv4 unicast network 172.31.254.46/32 network 172.31.254.176/32 maximum-paths 8 graceful-restart ! address-family ipv4 unicast vrf ten1vrf1 redistribute connected neighbor 10.20.30.40 remote-as 50000 neighbor 10.20.30.40 remove-private-as neighbor 10.20.30.40 bfd neighbor 10.20.30.50 remote-as 50000 neighbor 10.20.30.50 remove-private-as neighbor 10.20.30.50 bfd maximum-paths 8 ! address-family ipv6 unicast ! address-family ipv6 unicast vrf ten1vrf1 redistribute connected maximum-paths 8 ! address-family l2vpn evpn graceful-restart ! !

Rack1-Device1# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor 10.20.20.4 remote-as 4200000000
 neighbor 10.20.20.4 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.123/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 remove-private-as
  neighbor 10.20.30.40 bfd
  neighbor 10.20.30.50 remote-as 50000
  neighbor 10.20.30.50 remove-private-as
  neighbor 10.20.30.50 bfd
  maximum-paths 8
 !
 address-family ipv6 unicast
 !
 address-family ipv6 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!

Rack1-Device2# show running-config router bgp
router bgp
 local-as 4200000000
 capability as4-enable
 fast-external-fallover
 neighbor 10.20.20.5 remote-as 4200000000
 neighbor 10.20.20.5 next-hop-self
 address-family ipv4 unicast
  network 172.31.254.46/32
  network 172.31.254.176/32
  maximum-paths 8
  graceful-restart
 !
 address-family ipv4 unicast vrf ten1vrf1
  redistribute connected
  neighbor 10.20.30.40 remote-as 50000
  neighbor 10.20.30.40 remove-private-as
  neighbor 10.20.30.40 bfd
  neighbor 10.20.30.50 remote-as 50000
  neighbor 10.20.30.50 remove-private-as
  neighbor 10.20.30.50 bfd
  maximum-paths 8
 !
 address-family ipv6 unicast
 !
 address-family ipv6 unicast vrf ten1vrf1
  redistribute connected
  maximum-paths 8
 !
 address-family l2vpn evpn
  graceful-restart
 !
!

Note

For information about commands and supported parameters to configure remove-private-as attribute, see Extreme Fabric Automation Command Reference, 2.6.0 .

Configure remove-private-as on BGP Peer