Changes the RIP transmission mode for one or all VLANs.
| vlan_name | Specifies to apply settings to a specific VLAN name. |
| all | Specifies all VLANs. |
| none | Specifies to not transmit any packets on this interface. |
| v1only | Specifies to transmit RIP version 1 format packets to the broadcast address. |
| v1comp | Specifies to transmit RIP version 2 format packets to the broadcast address. |
| v2only | Specifies to transmit RIP version 2 format packets to the RIP multicast address. |
N/A.
None.
The following command configures the transmit mode for the VLAN finance to transmit version 2 format packets to the broadcast address:
# configure rip finance txmode v1comp
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.3 Feature License Requirements document.