Enables router discovery advertisements on the VLAN and the processing of router discovery messages.
| vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
This command is only valid when the specified VLAN has an IPv6 address associated with it. After IPv6 Router Discovery is enabled on a VLAN, router advertisement messages are regularly sent on all ports associated with the VLAN.
The following example enables router discovery for the VLAN "top_floor":
enable router-discovery vlan top_floor
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 32.3 Feature License Requirements document.