Configures the auto-peering TCP MD5 password devices will configure in the TCP MD5.
| auto-peering | Specifies Auto-peering. |
| one-config | Specifies changing the BGP Auto-peering OneConfig configuration. |
| password | Configures the password for Auto peering neighbors. |
| none | Removes the current password |
| encrypted | Specifies that the password is in encrypted format. |
| tcpPassword | Specifes the TCP MD5 password/secret-key. |
N/A.
Changing auto peering password might cause peers to be disconnected if passwords do not match.
The following example sets the password to "123":
# configure auto-peering one-config password 123
This command was first available in ExtremeXOS 31.1.
This command is available on the ExtremeSwitching X465, X590, X695 series switches.
This feature requires the Advanced Edge or Base license. For more information about licenses, see the ExtremeXOS 32.3 Feature License Requirements .