configure bgp evpn l3vni

configure bgp evpn l3vni [vni_value | none] vr vr_name

Description

Configures a Layer 3 virtual network identifier (VNI) and binds it to a VPN virtual router interface (VRF).

Syntax Description


bgp	Specifies changing the BGP configuration.
evpn	Specifies changing the EVPN configuration.
l3vni	Specifies changing the integrated routing and bridging IP VRF VNI configuration.
`vni_value`	Sets the VNI to a value between 1 and 16,777,215.
none	Removes an existing VNI setting for this EVPN L3VNI.
vr	Specifies binding the VNI to a VRF.
`vr_name`	Sets the VRF name.

Default

N/A.

Example

The following example binds VNI 100 to VRF "vrf1":

# configure bgp evpn l3vni 100 vr vrf1

History

This command was first available in ExtremeXOS 30.6.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP feature, see the ExtremeXOS 32.3 Feature License Requirements document.