Resolved Issues in ExtremeXOS 21.1.5-Patch1-7

The following issues were resolved in ExtremeXOS 21.1.5-Patch1-7. ExtremeXOS 21.1.5-Patch1-7 includes all fixes up to and including ExtremeXOS 11.6.5.3, and earlier, ExtremeXOS 12.0.5, ExtremeXOS 12.1.7, ExtremeXOS 12.2.2-patch1-12, ExtremeXOS 12.3.6, ExtremeXOS 12.4.5, ExtremeXOS 12.5.5, ExtremeXOS 12.6.3, ExtremeXOS 12.6.5.2-Patch1-3, ExtremeXOS 12.7.1, ExtremeXOS 15.1.5.4-Patch1-9, ExtremeXOS 15.2.4.5-Patch1-5, ExtremeXOS 15.3.1.4-patch1-47, ExtremeXOS 15.3.5.2-patch1-10, ExtremeXOS 15.4.2.8, ExtremeXOS 15.5.5.2, ExtremeXOS 15.6.5, ExtremeXOS 15.7.3, ExtremeXOS 16.1.3, ExtremeXOS 21.1.1, ExtremeXOS 21.1.2, ExtremeXOS 21.1.3, and ExtremeXOS 21.1.4. For information about those fixes, see the release notes for the specific release.

Click to expand in new window

Resolved Issues, Platform-Specific, and Feature Change Requests (CRs) in ExtremeXOS 21.1.5-Patch1-7

CR Number Description
General
xos0060606 Dot1x authentication fails when Dot1x state machine remains in connecting state for the client.
xos0063567 OSPF stops exporting static routes when NSSA area export is disabled.
xos0070488 Chalet needs to support configuring the higher port speeds: 100G, 50G, and 25G.
xos0071788 The output of the show configuration/show configuration detail commands does not show management port related traps configuration.
xos0072253 LSP takes a longer time (320 seconds) to switch over from primary path (strict) to secondary path (dynamic).
xos0072564 Chalet stops responding if the port display string contains German special characters.
xos0072581 In VRRP IPv6 environment, router advertisement with link-local IPv6 interface address causes host connectivity issues.
xos0072748 After rebooting the switch, OSPF address range conflict error messages appear when summarized route range subnets between the OSPF areas overlap.
xos0072913 After timing out on Dot1x supplicant expiry timer, switch does not respond to EAPOL start packets received from supplicants.
xos0072916 Traffic is not forwarded to VPLS peer after LSP path failover.
xos0072941 Memory leak occurs in policy process when ports go down.
xos0072943 PTPV2 process ends unexpectedly with signal 5 when rebooting the switch with Network Timing license enabled.
xos0072978 Dot1x authentication fails when Dot1x state machine remains in aborting state for the client.
xos0072979 After rebooting the switch or restarting the Dot1x supplicant, Dot1x state machine remains in connecting state, and clients are not authenticated if MAC and Dot1x are enabled on the same port.
xos0073002 Need "smart refresh" support for IPv6 policies.
xos0073070 The limit-learning feature is not working as expected in MAC Move/LOOP scenarios.
xos0073143 After retrieving VLAN statistics through SNMP or CLI in a certain sequence, switch stops responding to VLAN related SNMP polling and show commands.
xos0070532 ACL smart refreshed does not work after change in the packet resolution.
xos0071418 Ports configured for BPDU restriction are re-enabled on recovery-timeout even if administratively disabled.
xos0072801 If a NetLogin MAC address entry is learned on multiple VLANs, then the entry is re-authenticated only in the first VLAN on which it was authenticated.
xos0073155 Two IPV6 gateways appear on the Windows computer (host) after disabling/enabling the VRRP master VLAN port.
xos0073376 ACL smart refresh is not working as expected for source address (0.0.0.0/0) match condition.
xos0072170 Traffic drops when egress CEP filtering is enabled on a VPLS service VMAN sharing port.
xos0072382 After NetLogin client authentication, at random times ARP entries are programmed without port numbers.
xos0072316 PTP IP multicast packets are not forwarded
Summit X670-G2 Series Switches
xos0073117 On Summit X670-G2 series switches after an ExtremeXOS upgrade, the error "Deferred L2 notification code out of sync unit 0" appears in show log output.
ExtremeSwitching X690 and X870 Series Switches
xos0072783 VLAN process ends unexpectedly when disabling all remote VXLAN tunnel end points using the command disable virtual-network remote-endpoint vxlan all.