The following are new open issues for supported features found in ExtremeXOS 22.7.5.
|Extended Edge Switching
With multiple bridge port extenders (BPEs) attached to a partitioned port, starting Extended Edge Switching full automation by running either the unconfigure switch or unconfigure switch all command removes the partitioned port configuration, and thus full automation is not triggered, and the Extended Edge Switching topology is not created.
Workaround: Do not attach BPEs to partitioned ports, or use partial automation or manual configuration to create the Extended Edge Switching topology.
|On an Extended Edge Switching ring with redundant controlling bridges (CBs) with cross-connect MLAGs and an extended port LAG with LAG members from two different cascades, if a CB loses connections to both cascades, then flood traffic from the isolated CB is not sent to any member of the extended port LAG.
On an MLAG peer, if an explicit port classification forward rule is configured on an MLAG port, it does not work as expected.
Workaround: Configure the same rule on the ISC port.