Changes the configuration of a notification log.
| filter-profile-name | Sets the notification filter profile for this log (default: none). |
| none | Specifies the global entry limit. |
| filter_profile_name | Sets the notification filter profile for this log (default: none) |
| none | Specifies no notification filter profile. |
| filter_profile_name | Specifies the notification filter profile name. |
| hex | Provide value in hexadecimal. |
| hex_name | Name of the log in hexadecimal. |
| filter-profile-name | Set the notification filter profile for this log. Default = none. |
| hex_filter_profile_name | Notification filter profile name in hexadecimal. |
| entry-limit | Sets the maximum number of entries in this log (default: system-managed). |
| system-managed | Specifies that entries will be removed from this log when the global entry limit is exceeded. |
| entry_limit | Specifies that entries will be removed from this log when the specified limit is exceeded. The range is 1–16000. |
Use this command to change the configuration of a notification log. Use the configure snmpv3 add filter-profile command to create notification filter profiles.
The following example sets the filter for the default log to all and its maximum size to 1500:
configure snmp notification-log default filter-profile-name all entry-limit 1500
This command was first available in ExtremeXOS 15.5.
The hex keywords and hex_name and hex_filter_profile_name variables were added in ExtremeXOS 15.6
This command is available on all ExtremeSwitching Universal switches.