unconfigure inline-power
        classification
    
        
            unconfigure inline-power classification
                ports
                port_list
        
        Description
            
            This command configures PoE port-level classification
                power-up mode for Extreme Networks PoE devices that do not support 802.3bt when
                connecting to switches with 60W/90W PoE ports. ExtremeSwitching platforms
                support per-port basis configuration.
        
        Syntax Description
            
            
                        
                            | classification | Classification power-up mode. | 
                        
                            | ports | Specifies the port. | 
                        
                            | port_list | Port list separated by a comma or - . | 
                    
        
        Default
            
            Depends on the maximum classification level supported by the platform. For
                example, the 5720 Series has a default classification level of 802.3bt-type4, while
                5320 Series has a default classification level of 802.3at.
        
        Usage Guidelines
            
            This command restores port-level classification power-up mode to default based on
                port type.
        
        Example
            
            # show inline-power configuration ports 20-26
Port   Config    Operator Limit  Priority   Detection                   Classification    Label
20     Enabled   60000 mW        Low        802.3af-only                802.3pre-bt       N                    
21     Enabled   60000 mW        Low        802.3af-only                802.3bt-type3     N                    
22     Enabled   60000 mW        Low        802.3af-only                802.3bt-type3     N                    
23     Enabled   45000 mW        Low        2-point legacy-and-802.3af  802.3bt-type3     N                    
24     Enabled   60000 mW        Low        802.3af-only                802.3at           N      model name-port10   
25     Enabled   90000 mW        Low        4-point legacy-and-802.3af  802.3pre-bt       N                    
26     Enabled   90000 mW        Low        802.3af-only                802.3bt-type3     N     
        History
            
            This command was first available in ExtremeXOS 31.3.
        
        Platform Availability
            
            This command is available on:
        
        PoE+
            
            
                    - ExtremeSwitching
                            5420F-8W-16P-4XE—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5420F-24P-4XE—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5420F-16MW-32P-4XE—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5420F-16W-32P-4XE—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5420F-48P-4XE—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5420F-48P-4XL—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5420M-16MW-32P-4YE—ExtremeXOS 31.3 and
                        later.
- ExtremeSwitching
                            5320-48P-8XE—ExtremeXOS 31.6 and
                        later.
- ExtremeSwitching
                            5320-24P-8XE—ExtremeXOS 31.6 and
                        later.
- ExtremeSwitching
                            5320-16P-4XE—ExtremeXOS 31.7 and
                        later.
- ExtremeSwitching
                            5320-16P-4XE-DC—ExtremeXOS 31.7 and
                        later.
PoE++
            
            
                - ExtremeSwitching 5520-24W—ExtremeXOS 31.1 and later.
- ExtremeSwitching 5520-48W—ExtremeXOS 31.1 and later.
- ExtremeSwitching 5520-12MW-36W—ExtremeXOS 31.1 and later.
- ExtremeSwitching 5420F-8W-16P-4XE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420F-16MW-32P-4XE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420F-16W-32P-4XE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420M-24W-4YE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420M-16MW-32P-4YE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5420M-48W-4YE—ExtremeXOS 31.3 and later.
- ExtremeSwitching 5720-24MW—Switch Engine 32.1 and later.
- ExtremeSwitching 5720-24MXW—Switch Engine 32.1 and later.
- ExtremeSwitching 5720-48MW—Switch Engine 32.1 and later.
- ExtremeSwitching 5720-48MXW—Switch Engine 32.1 and later.