Controls the administrative state of a log.
| default | The default log. |
| name | Specifies the name of the log. |
| hex | Provide value in hexadecimal. |
| hex_name | Name of the log in hexadecimal. |
| all | Specifies all logs. |
Disabled.
Use this command to control the administrative state of a log.
The following example enables all logs:
enable snmp notification-log all
The following example enables nmslog2:
enable snmp notification-log nmslog2
This command was first available in ExtremeXOS 15.5.
The default and hex keywords and hex_name variable were added in ExtremeXOS 15.6.
This command is available on all ExtremeSwitching Universal switches.