configure cfm segment frame-delay/frame-loss transmit interval

configure cfm segment segment_name {frame-delay | frame-loss} transmit-interval interval

Description

Configures the delay between two consecutive DMM/LMM frames.

Syntax Description


`segment_name`	Alphanumeric string identifying the segment name.
frame-delay	Y.1731 Ethernet frame delay measurement.
frame-loss	Y.1731 Ethernet frame loss measurement.
`interval`	Trasmit interval in seconds, with a range of 1 to 90.

Default

N/A.

Usage Guidelines

Configures the delay between two consecutive DMM/LMM frames. The configured delay would be for both continuous and on-demand transmission. This command is optional, and if not configured, the default interval would be 10 seconds.

If the optional keyword frame-delay or frame-loss is not specified, the same value of transmit-interval will be used for both DMM and LMM. The optional keyword allows configuring different values for DMM and LMM.

Example

configure cfm segment cs2  frame-delay transmit-interval 10
configure cfm segment cs2  frame-loss  transmit-interval 10

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on all ExtremeSwitching Universal switches.