Disconnect the RPS Cable and the AC Power Cord

Important

Important

Connections must be removed in a specific order when detaching an RPS from a powered system.

To disconnect the RPS:

  1. Disconnect the AC power cord from the AC input power connector on the rear of the RPS before disconnecting the RPS cable.
  2. Disconnect the RPS cable from the rear panel of the RPS and the rear panel of the switch.
Click to expand in new window
RPS cable and AC Power Cord Connection
RPS cable and AC Power Cord Connection

The AC power LED on the rear of the RPS turns off to indicate that the power to the RPS has been disconnected.