Log In for the First Time on Fabric Engine

Before you begin

Note

Fabric Engine does not support models 5320-24T-4X-XT and 5320-24T-24S-4XE-XT.

Onboard your switch with ExtremeCloud™. Log in or create your XIQ administrator account in order to select your switch operating system with XIQ at https://extremecloudiq.com.

About this task

To perform the initial login and complete initial configuration tasks, follow these steps.

Procedure

Using a terminal emulator such as PuTTY or TeraTerm, connect to the switch using the serial port connection.
Be sure that your serial connection is set properly:
- Baud rate: 115200
- Data bits: 8
- Stop bit: 1
Press [Enter] one or more times until you see the login prompt.
At the login prompt, log in using the default user name rwa.

For example:
login: rwa

When prompted for the password, enter rwa.

When you are logged in with the role-based authentical level of rwa, you can configure the login and password values for the other role-based authentication levels.