LRM/MACsec Adapter Technical Specifications

The LRM/MACsec Adapter (part no. 10965) can be attached to switch ports that are not LRM or MACsec capable, using a cable that is specifically designed for this purpose.

Note

Note

Models 5320-24T-4X-XT and 5320-24T-24S-4XE-XT do not support the LRM/MACsec Adapter.
Table 1. LRM/MACsec Adapter Packaged Dimensions
Height 3.00 cm (1.18 in)
Width 7.60 cm (2.99 in)
Length 12.35 cm (4.86 in)
Weight 300 g (0.66 lb)

LRM/MACsec Adapter Environmental Data and Standards

Table 2. Environmental Data
Operating temperature
0°C to 40°C (32°F to 104°F) when used with the following optics modules:
  • Tunable DWDM SFP+ (part no. 10325)
  • ER SFP+ (part no. 10309)
  • ZR SFP+ (part no. 10310)
  • Bidirectional 120 km SFP (part nos. MGBIC-BX120-U and MGBIC-BX120-D)

0°C to 45°C (32°F to 113°F) when used with all other supported optics modules

Storage and transportation temperature

-40°C to 70°C (-40°F to 158°F)

Humidity

10% to 95% relative humidity, non-condensing

Altitude

0 to 3,000 meters (9,850 feet)

Table 3. Safety Standards

North American Safety of ITE

UL 62368-1:2014, Listed Device (US)

UL 60950-1 2nd Ed., A2:2014, Listed Device (US)

CAN/CSA 22.2 #62368-1-14:2014 Canada)

European Safety of ITE

EN 62368-1:2014

EN 60950-1:2006+A11+A1+A12+A2

IEC 62368-1:2014

IEC 60950-1:2005 2nd+A1:2009+A2:2013

2014/35/EU Low Voltage Directive

Five-Slot Bracket

Table 4. Five-Slot Bracket for LRM/MACsec Adapter: Specifications
Part no. 10966
Height 4.32 cm (1.70 in)
Width 48.26 cm (19.00 in)
Length 5.00 cm (1.97 in)
Weight 487 g (1.07 lb)