ExtremeWireless™ AP3000X Access Point Installation Guide
> Cleaning Guidelines for Radome
Published June 01, 2024
Search this document
Print this page
Email this page
View PDF
Previous
Next
Preface
Text Conventions
Documentation and Training
Help and Support
Send Feedback
AP3000X Overview
New in this Guide
Product Specifications
Hardware Ports
AP3000X Integrated Antennas
Antenna Ports and Configurations
LED Status
Power Profile
Supported Accessories
Micro USB Console Port Information
MAC Address
Cleaning Guidelines for Radome
Purchase Information
Access Point Installation
Installation Work Flow
Box Contents
Install the Access Point on a Wall or a Flat Ceiling
Install the Access Point on a Silhouette Ceiling
Install the Access Point to a 9/16th T-bar Ceiling
Install the Access Point to a Wall with AH-ACC-BKT-AX-WL
Install the Access Point on a Junction Box
Install the Access Point on a Beam
Connect Antennas
Connect a Power Supply
Lock Your Access Point
Post Installation
Regulatory and Compliance Information
Safety Guidelines
Professional Installation Instruction
FCC Notice (Part 15 - Class B)
FCC Radiation Exposure Statement
Conformitè Europëenne (CE) Information
CE Marking and European Area (EEA)
Country of Manufacture
China Compliance Statement
Israel Regulatory Statement
Brazil Anatel Statement
Mexico Compliance Statement
UK Statement and CE Statement
Extreme Networks UK Address
Extreme Networks EU Importer Address
Taiwan Regulatory Statement
Thailand Regulatory Notice
European Waste Electrical and Electronic Equipment (WEEE) Notice
Supplement to Product Instructions
Declaration of Conformity in Languages of the European Community
Cleaning Guidelines for Radome
You can use the following cleaning solutions:
Hydrogen peroxide (a 3% solution)
Chlorine bleach
Sodium hypochlorite (a 0.05% solution)
Ethyl alcohol (a 75% solution)
Isopropyl alcohol (a 75% solution)
White vinegar
Sporicidal (peracetic acid; a 0.5% solution)
Water
Baking soda (a 3:1 solution)
Non-abrasive soap
Note
Do not wash the
AP3000X
. You will damage the device and void the warranty. Instead you can wipe the radome with a damp cloth. But you must avoid the ports and connectors. Do not power wash the AP.
