Hardware Ports

The AP3000X has several ports and hardware features to help you when you install the access point. Use the following diagrams and locate the ports and other hardware features.

The AP3000X access point facing forward with the 12VDC power port , the ETH1 port in the middle, and the ETH0/PoE+ port on the right

Table 1. AP3000X Ports and Connections
Item	Port	Description
1	12VDC	12-volts of direct current.
2	ETH1 port	1GE/100/10.
3	ETH0/PoE+ port	2.5GE/1GE/100 with PoE In.

The AP3000 access point facing forward with the Kensington security slot , the reset button, the 2.0 USB type A port in the middle, and the Console port on the right.

Table 2. AP3000X Ports and Connections
Item	Description	Use
1	Kensington security slot	A security feature used to secure your AP. This is an optional task, but it prevents someone from taking the AP.
2	2.0 USB type A port	Used with a thumb drive or other external device.
3	Console port	Micro USB console port for a serial connection between your management system and the access point. Use the port when you troubleshoot the AP. The best practice is to use the Extreme Networks micro USB cable (ACC-WIFI-MICRO-USB). When you connect to the device, the management station must have a VT100 emulation program, such as the terminal emulator TeraTerm Pro or Hilgraeve HyperTerminal®. Set your baud rate to 115200.