Status LED Activity and Light Sensor

The light sensor is located in the front face of the access point but is not visibly marked. The status LED is located at the bottom of the access point and conveys the access point operational status for system power. For more details about access point front and rear features and port information, see AP302W Features.

Table 1. Status light activity

Status light color	Activity	Description
Green	Steady	The device has a Control and Provisioning of Wireless Access Points (CAPWAP) connection to ExtremeCloud IQ and is operating normally
	Slow blinking	The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3af power instead of 802.3at power
Amber	Steady	The device is initializing, rebooting, or is running without a CAPWAP connection
	Slow blinking	The device has no CAPWAP connection to ExtremeCloud IQ, and is operating on 802.3af power instead of 802.3at power
	Fast blinking	The device is upgrading it's IQ Engine firmware
Dark	None	Power is off or the status indicator is disabled