Access Point and Accessory Box Contents and Order Information

Access point box contents

When you purchase the access point, ensure that the following items are available in the box:
  • An AP302W access point
  • One AP302W Quick Reference Guide
  • One wall plate in-box stainless-steel mounting bracket for wall or junction box or solid ceiling mounting
  • One clear hardware bag containing:
    • One flat head T8 security torx M2.5×6.5 mm long locking screw
    • Two Phillips flat head 6–32×14 mm long black screws for USA junction box attachment
    • Two pan head M3.5×16 mm long screws for solid wall or anchor attachment
    • Two 25 mm long white plastic screw-in anchors
  • One 100 mm or 140 mm RJ45 cable (not including connectors), CAT.5E flat LAN cable
Note

Note

All optional brackets and accessories are sold separately.

ACC-BKT-AX-WP-SPARE accessory bag contents

The wallplate in-box stainless-steel mounting bracket is sold as a spare if you need an additional or a replacement bracket for wall or solid ceiling installations and junction box installations. The -SPARE accessory must be purchased separately.

The SPARE accessory bag contains the following items:
  • One ACC-BKT-AX-WP-SPARE accessory (same as the in-box wallplate stainless-steel mounting bracket)
  • One clear hardware bag containing:
    • One flat head T8 security torx M2.5×6.5 mm long locking screw
    • Two Phillips flat head 6–32×14 mm long black screws for USA junction box attachment
    • Two pan head M3.5×16 mm long screws for solid wall or anchor attachment
    • Two 25 mm long white plastic screw-in anchors
  • One URL card

ACC-BKT-AX-WP-EXT accessory bag contents

The ACC-BKT-AX-WP-EXT accessory, also called the wall extension accessory is used with the wall plate in-box stainless-steel bracket for EU model junction box installations. The -EXT accessory must be purchased separately.
Tip

Tip

Most European countries model junction box or for any other junction box, if the RJ45 cable protrudes from the junction box face plate, the best practice is to use the extension accessory with the wall plate bracket for a 20 mm extension from the junction box.
Note

Note

You can use the -EXT accessory for other installation options where the RJ45 cable or system cables are protruding outside the wall.
The EXT accessory bag contains the following items:
  • One ACC-BKT-AX-WP-EXT accessory
  • Four Phillips washer pan head M2.5×7 mm long screws to attach the extension to the wall plate bracket
  • Two Phillips pan head M3.5×38 mm long screws for wall plate bracket mounting
  • Two Phillips flat head 6–32×35 mm long screws for USA and EU junction box attachment

ACC-BKT-AX-WP-DSKSTD accessory bag contents

The ACC-BKT-AX-WP-DSKSTD accessory, also called the desk stand is used to install the access point to a desk. The desk stand accessory bag contains the following items:
  • One ACC-BKT-AX-WP-DSKSTD accessory
  • One flat head T8 security torx M2.5×6.5 mm long locking screw
  • Two Phillips flat head M3.5×12 mm long self-tapping wood screws
9036815-00 Rev AA