Mounting the AP to a wall using the WS-MBI-WALL04 bracket

Mounting the AP to a flat ceiling requires the WS-MBIWALL04 (#30516) bracket, two Philips Pan-head screws, and two screw-in anchors. They must be purchases separately.
  1. Install the WS-MBI-WALL04 bracket onto a wall/ceiling with two screws and anchors and ensure that the locking tab is on the top side.
    Click to expand in new window
    Mounting the AP using the WS-MBI-WALL04 Bracket
    • Use the WS-MBI-WALL04 as a template and mark the holes to be used to mount the AP. It is recommended to use the holes marked "A" or "B".
    • Drill the holes and attach the bracket using the screws and screw-in anchors.
    Note

    Note

    When using the "A" or "B" holes, if the holes are not near the corners of the bracket, you can break off the corner to decrease the bracket's visibility once the AP is installed.
    Click to expand in new window
    Mounting the AP using the WS-MBI-WALL04 Bracket (when bracket corners are broken off)
  2. Connect the LAN/Ethernet cable to the AP.
  3. Slide the AP onto the keyhole posts in the bracket, push down, and lock it into place.
9035130-03