Mounting the AP using the Main Mounting Bracket to a Flat T-bar

The AP can be mounted on a t-bar using the mian mounting bracket that is shipped with the unit.
Pre-Installation checklist:
  • T-bar width must be 15/16” (24mm).
  • T-bar bottom must be flat all the way across.
  • T-bar minimum base thickness: N/A; must be structurally sound.
  • T-bar maximum base thickness: 0.055”.
  • Ceiling Tile must be flat all the way across.
  1. Remove the ceiling tiles, push and rotate the main mounting bracket onto the T-bar in such a way that the center angled locking tabs of the main bracket gets attached to the T-bar.
    Click to expand in new window
    Attaching the main mounting bracket to a T-bar
  2. Hold the AP and rock it back and forth to ensure it is securely mounted.
  3. Replace the tiles.
  4. Attach the Ethernet cable‘s RJ45 connector to the LAN1/GE1 port.
9035130-03