The following features are on the front of the AP:
Item | Description |
---|---|
1 - Reset Button | The power reset button is recessed and located on the top of the AP. Use a tool to press the reset button. |
2 - Cap | Remove the caps to access the thumbscrews. |
3 - Thumbscrew | The thumbscrews let you adjust and set the tilt angle of the camera. |
4 - Locking Pin | The locking pin lets you adjust and set the rotational position of the camera. |
LEDs are located on the top cover of the AP.
Symbol | Description |
---|---|
|
Camera |
|
IoT (BLE or 802.15.4) |
|
Radio 2 (2.4 GHz) |
|
Radio 1 (5 GHz) |
|
LAN 1 (Ethernet 1) |
|
Status |