Uplink and Power Connections

The AP uses PoE (Power over Ethernet) or an external power supply, connecting from the back of the AP.

Power Sources

Power Source	Description
LAN 1 uplink PoE	The LAN 1 option requires an 802.3af power source.
External 12V DC power supply	This AP can optionally be powered by an external DC power supply plugged into an AC source. Plug the supply‘s input jack into the DC-In port.

To power the AP with the optional external 12V DC power supply (30512, WS-PSI12V-MR2), plug the power cord into the power connector on the back of the AP (Figure 2).

Note

LAN connectors with shrouds will not fit into the ports. Remove the shroud or use an optional jumper cable.