Specifications

This appendix lists the specifications for the ExtremeWireless™ Indoor Access Point AP3916ic.

Click to expand in new window

Specifications for the AP3916ic

Item Specification
AP Part Number: 31034 WS-AP3916ic-FCC
AP Part Number: 31035 WS-AP3916ic-ROW
Enclosure material AP enclosure is not plenum rated.
Power source

Power is provided by Power-over-Ethernet 802.3af.

Optional AC power adapter (30512) can be purchased separately. The adapter includes six individual AC adapter clips for different global regions.

Power consumption

See Data Sheet.

Camera Integrated 2MP camera with resolution up to 1080p with manual view adjustment.
Antenna Four single band Wi-Fi internal antennas and one internal antenna that can operate as Bluetooth (BLE) or 802.15.4.
Uplink interface One 10/100/1000BT Ethernet port
RoHS compliant Yes
Radio configuration

Dual Band Dual Concurrent 802.11ac and 802.11n

Radio 1: 5 GHz; 2x2:2; IEEE 802.11 ac (up to 886 Mbps per radio)

Radio 2: 2.4 GHz; 2x2:2; IEEE 802.11n (up to 300 Mbps per radio)

Legacy 802.11abg mode support

Integrated sensor radio that operates as Bluetooth 4.0 radio or operates as 802.15.4 (one at a time)

Water/dust proof ratings NEMA1 or IP30
Operating temperature 0°C to 40°C
Non-operating transportation/storage -40°C to 70°C (-40°F to 158°F)
Altitude (feet) >6,500 feet; safety approved to 2,000 meters
Relative humidity (% RH) 0% to 95% (non-condensing)
Wind Not applicable. The AP3916ic is an indoor-only model.
ExtremeCloud™ enabled Yes