Mount the Access Point to a Wall using the
Main Mounting Bracket
Learn how to install the access point on a wall using the main mounting bracket that is
shipped with the unit.
About this task
The
main mounting bracket (#37201) ships with the AP and can be used to mount the AP onto a
wall. This is the recommended method of installation for a wall mounting
procedure.
Procedure
Use the mounting bracket as
a template and mark the hole centers on the wall.
Main mounting
bracket
Insert the screws into the holes
of the mounting bracket and use the screw-in anchors if needed.
Insert the Ethernet cable‘s RJ45
connector into the LAN1/GE1 port.
Insert the access point onto the
bracket‘s four feet and slide it down to lock it in
place.
Note
The feet of the bracket
must be pointing up.
Attaching the access
point to the main mounting bracket
Callout
Description
1
Guide posts to attach the security torx locking
screw
Attach the security torx locking screw to keep the main mounting bracket in
place.
