ExtremeWireless™ AP510i Access Point Installation Guide
>
Installation Process
> Mount the Access Point on a Drywall or a Wood Wall or a Solid Flat Ceiling
Published March 2021
Search this document
Print this page
Email this page
View PDF
Previous
Next
Preface
Conventions
Providing Feedback
Getting Help
Documentation and Training
Overview
Access Point Features
AP510i LED Status Indicators
AP510i Powering Methods
Installation Process
Verify the Box Contents
Mount and Connect the Access Point
Mounting Brackets and Accessories Usage
Mount the Access Point on a Drywall or a Wood Wall or a Solid Flat Ceiling
Mount the Access Point to a Wall using the Main Mounting Bracket
Install a Security Torx Locking Screw
Mount the Access Point to a Wall Using an Optional Wall and Box Bracket
Mount the Access Point onto a Wall Using the Main Bracket and the Flat Metal Easy-Attach Adapter
Mount the Access Point to a Wall Using the Phillips Pan-Head Screws
Mount the Access Point to a Suspended or Drop Ceiling
Mount the Access Point Using the Main Mounting Bracket to a Flat T-bar
Mount the Access Point Using the Main Mounting Bracket and KT-135628-01 Adapter to a Flat T-bar
Mount the Access Point Using the WS-MBI-DCFLUSH Bracket to a Flat T-bar
Mount the Access Point Using the WS-MBI-DCMTR01 Bracket
Mount the Access Point to a Junction Box
Mount the Access Point to a Beam
Specifications
Antenna Information
Regulatory and Compliance Information
Safety Guidelines
Federal Communications Commission (FCC) Notice
Industry Canada Notice
Brazil Agência Nacional De Telecomunicações (Anatel) Statement
Hazardous Substances
Supplement to Product Instructions
NCC Statement
CE Information
European Waste Electrical and Electronic Equipment (WEEE) Notice
Declaration of Conformity in Languages of the European Community
Mount the Access Point on a Drywall or a Wood Wall or a Solid Flat Ceiling
About this task
The access point is installed on drywall or wood wall or to a solid flat ceiling using:
#37201, stainless-steel main mounting bracket that ships with the unit
#30516, WS-MBI-WALL04 bracket, two Phillips pan-head screws, and screw-in anchors
Note
The WALL04 bracket, screws, and screw-in anchors are used for drywall mounting. For wood wall mounting, only the WALL04 bracket and screws are used.
#37201, stainless-steel main mounting bracket with #37210, flat metal easy-attach adapter
Phillips pan head screws
Tip
The best practice is to install the access point using the mounting brackets.
