Access Point Features

Learn about AP510i access point radios, side ports, LED, and console information.

The enterprise class 802.11ax AP510i access point has the following features:

Radios: 2 radios; 1 IoT radio (2.4 GHz).
Console Port: RJ45.
- 1 x 100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45
- 1 x 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
LEDs: 6 – All LEDs will be on during reset (see AP510i LEDs Status for details).
One reset button.
Power: PoE 802.3af; 12VDC external power in connector (see AP510i Powering Methods for details).
Antennas: – Eight WiFi internal antennas and One BLE internal antenna.
Temperature:
- 0 °C to +50 °C (+32 °F to +122 °F) @ 6000 ft
- 0 °C to +45 °C (+32 °F to +113 °F) @ Sea Level
Enclosure: Plastic only.

Table 1. AP510i back ports description
Callout	Description
1	Kensignton lock
2	12V DC power supply
3	Console port (yellow)
4	LAN 2 (GE) (black)
5	LAN1 (5 GE) (purple)

Note

On the access point, there is a hole near the Kensington lock in the top-rear that can be used as a provision for safety hanger. There is also a hole on the rear of the access point that can be used as a safety hanger provision.

The safety hanger can be a wire or a cable that is used to secure the access point and keep it from falling in case ceiling and wall installation using the main mounting bracket fails.

The Kensington lock can use a 3 mm diameter safety hangar cable and the rear hole can accommodate a 2.9 mm diameter safety hanger cable.