Mount the Access Point onto a Wall Using the Main Bracket and the Flat Metal Easy-Attach Adapter

About this task

The AP can be mounted onto a wall or a solid ceiling by attaching a flat metal easy-attach adapter to the main mounting bracket. The flat metal easy-attach adapter (#37210) must be purchased separately.

Procedure

  1. Attach the flat metal indoor bracket to the main bracket. Keep the bracket to the center of the main bracket, push and rotate it.
    Click to expand in new window
    Attach the optional Flat Metal Indoor Adaptor to the main mounting bracket
    Long metal adapter being attached to the back of the flat metal suqare bracket
  2. Hold the AP to the surface to which it needs to be attached and use the optional bracket‘s end holes as a template to mark the attachment holes.
  3. Drill two holes on the wall where you want to mount the AP.
  4. Connect the LAN or Ethernet cable to the back of the AP.
9035994-03 Rev AA