Add Path on Tenant BGP Peer

You can configure additional paths (for both IPv4 and IPv6) when you create or update a BGP peer.

About this task

Follow this procedure to add paths on tenant BGP peer.

Procedure

  1. To configure an additional path when you create a BGP peer, run the following command:
    efa tenant service bgp peer create --name <bgp-peer-name> --tenant <tenant-name> 
            --ipv6-uc-nbr-add-path-capability <device-ip,vrf-name:neighbor-ip,
                   {send | receive | both}>
            --ipv6-uc-nbr-add-path-advertise-all <device-ip,vrf-name:neighbor-ip,
                   {true | false}>
            --ipv6-uc-nbr-add-path-advertise-group-best <device-ip,vrf-name:neighbor-ip,
                   {true | false}>
            --ipv6-uc-nbr-add-path-advertise-best <device-ip,vrf-name:neighbor-ip,
                   2-16>
  2. To configure an additional path when you update a BGP peer, run the following command:
    efa tenant service bgp peer update --name <bgp-peer-name> --tenant <tenant-name> 
            --ipv4-uc-nbr-add-path-capability <device-ip,vrf-name:neighbor-ip,
                   {send | receive | both}>
            --ipv4-uc-nbr-add-path-advertise-all <device-ip,vrf-name:neighbor-ip,
                   {true | false}>
            --ipv4-uc-nbr-add-path-advertise-group-best <device-ip,vrf-name:neighbor-ip,
                   {true | false}>
            --ipv4-uc-nbr-add-path-advertise-best <device-ip,vrf-name:neighbor-ip,
                   2-16>
  3. Verify the configuration on the SLX device.
    Rack1-Device1# show running-config router bgp
    router bgp
     local-as 4200000000
     capability as4-enable
     fast-external-fallover
     neighbor 10.20.20.4 remote-as 4200000000
     neighbor 10.20.20.4 next-hop-self
     address-family ipv4 unicast
      network 172.31.254.46/32
      network 172.31.254.123/32
      maximum-paths 8
      graceful-restart
     !
     address-family ipv4 unicast vrf ten1vrf1
      additional-paths select all
      redistribute connected
      neighbor 10.20.30.40 remote-as 50000
      neighbor 10.20.30.40 additional-paths send receive
      neighbor 10.20.30.40 additional-paths advertise best 10 group-best all
      neighbor 10.20.30.40 bfd
      neighbor 10.20.30.50 remote-as 50000
      neighbor 10.20.30.50 additional-paths send 
      neighbor 10.20.30.50 additional-paths advertise best 8 group-best all
      neighbor 10.20.30.50 bfd
      maximum-paths 8
     !
     address-family ipv6 unicast
     !
     address-family ipv6 unicast vrf ten1vrf1
      redistribute connected
      maximum-paths 8
     !
     address-family l2vpn evpn
      graceful-restart
     !
    !
    Rack1-Device2# show running-config router bgp
    router bgp
     local-as 4200000000
     capability as4-enable
     fast-external-fallover
     neighbor 10.20.20.5 remote-as 4200000000
     neighbor 10.20.20.5 next-hop-self
     address-family ipv4 unicast
      network 172.31.254.46/32
      network 172.31.254.176/32
      maximum-paths 8
      graceful-restart
     !
     address-family ipv4 unicast vrf ten1vrf1
      additional-paths select all
      redistribute connected
      neighbor 10.20.30.40 remote-as 50000
      neighbor 10.20.30.40 additional-paths send receive
      neighbor 10.20.30.40 additional-paths advertise best 5
      neighbor 10.20.30.40 bfd
      neighbor 10.20.30.50 remote-as 50000
      neighbor 10.20.30.50 additional-paths receive
      neighbor 10.20.30.50 additional-paths advertise best 4
      neighbor 10.20.30.50 bfd
      maximum-paths 8
     !
     address-family ipv6 unicast
     !
     address-family ipv6 unicast vrf ten1vrf1
      redistribute connected
      maximum-paths 8
     !
     address-family l2vpn evpn
      graceful-restart
     !
    !

    For syntax and command examples, see the ExtremeCloud Orchestrator Command Reference, 3.2.0

Example

The following is an example output for adding additional paths when you create or update a BGP peer:
efa tenant service bgp peer create --name ten1bgppeer1 --tenant ten1 
   --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.40,50000 
   --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.40,true 
   --ipv4-uc-nbr-add-path-capability 10.20.246.15,ten1vrf1:10.20.30.40,both 
   --ipv4-uc-nbr-add-path-advertise-all 10.20.246.15,ten1vrf1:10.20.30.40,true
   --ipv4-uc-nbr-add-path-advertise-group-best 10.20.246.15,ten1vrf1:10.20.30.40,true
   --ipv4-uc-nbr-add-path-advertise-best 10.20.246.15,ten1vrf1:10.20.30.40,10

   --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.40,50000 
   --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.40,true 
   --ipv4-uc-nbr-add-path-capability 10.20.246.16,ten1vrf1:10.20.30.40,both
   --ipv4-uc-nbr-add-path-advertise-all 10.20.246.16,ten1vrf1:10.20.30.40,false
   --ipv4-uc-nbr-add-path-advertise-group-best 10.20.246.16,ten1vrf1:10.20.30.40,false
   --ipv4-uc-nbr-add-path-advertise-best 10.20.246.16,ten1vrf1:10.20.30.40,5


efa tenant service bgp peer update --name ten1bgppeer1 --tenant ten1 
   --operation peer-add 
   --ipv4-uc-nbr 10.20.246.15,ten1vrf1:10.20.30.50,50000 
   --ipv4-uc-nbr-bfd 10.20.246.15,ten1vrf1:10.20.30.50,true 
   --ipv4-uc-nbr-add-path-capability 10.20.246.15,ten1vrf1:10.20.30.50,send
   --ipv4-uc-nbr-add-path-advertise-all 10.20.246.15,ten1vrf1:10.20.30.50,true
   --ipv4-uc-nbr-add-path-advertise-group-best 10.20.246.15,ten1vrf1:10.20.30.50,true
   --ipv4-uc-nbr-add-path-advertise-best 10.20.246.15,ten1vrf1:10.20.30.50,8


   --ipv4-uc-nbr 10.20.246.16,ten1vrf1:10.20.30.50,50000 
   --ipv4-uc-nbr-bfd 10.20.246.16,ten1vrf1:10.20.30.50,true 
   --ipv4-uc-nbr-add-path-capability 10.20.246.16,ten1vrf1:10.20.30.50,receive
   --ipv4-uc-nbr-add-path-advertise-all 10.20.246.16,ten1vrf1:10.20.30.50,false
   --ipv4-uc-nbr-add-path-advertise-group-best 10.20.246.16,ten1vrf1:10.20.30.50,false
   --ipv4-uc-nbr-add-path-advertise-best 10.20.246.16,ten1vrf1:10.20.30.50,4
efa tenant service bgp peer show --detail
========================================================
Name             : ten1bgppeer1
Tenant           : ten1
State            : bs-state-created
Description      :

Static Peer
-----------
 Device IP           : 10.20.246.15
 VRF                 : ten1vrf1
 AFI                 : ipv4
 SAFI                : unicast
 Remote IP           : 10.20.30.40
 Remote ASN          : 50000
 Next Hop Self       : false
 Update Source IP    :
 BFD Enabled         : true
 BFD Interval        : 0
 BFD Rx              : 0
 BFD Multiplier      : 0
 Default Originate   : 
 Default Originate
 Route Map           : 
 Add Path Capability : Send, Receive
 Add Path Advertise  : All, Group Best, Best 10
 Dev State           : provisioned
 App State           : cfg-in-sync

 Device IP           : 10.20.246.15
 VRF                 : ten1vrf1
 AFI                 : ipv4
 SAFI                : unicast
 Remote IP           : 10.20.30.50
 Remote ASN          : 50000
 Next Hop Self       : false
 Update Source IP    :
 BFD Enabled         : true
 BFD Interval        : 0
 BFD Rx              : 0
 BFD Multiplier      : 0
 Default Originate   : false
 Default Originate
 Route Map           : 
Add Path Capability : Send
 Add Path Advertise  : All, Group Best, Best 8

 Dev State           : provisioned
 App State           : cfg-in-sync
Device IP        : 10.20.246.16
 VRF              : ten1vrf1
 AFI              : ipv4
 SAFI             : unicast
 Remote IP        : 10.20.30.40
 Remote ASN       : 50000
 Next Hop Self    : false
 Update Source IP :
 BFD Enabled      : true
 BFD Interval     : 0
 BFD Rx           : 0
 BFD Multiplier   : 0
 Default Originate: false
 Default Originate
 Route Map        : 
 Add Path Capability : Send, Receive
 Add Path Advertise  : Best 5
 Dev State        : provisioned
 App State        : cfg-in-sync

 Device IP        : 10.20.246.16
 VRF              : ten1vrf1
 AFI              : ipv4
 SAFI             : unicast
 Remote IP        : 10.20.30.50
 Remote ASN       : 50000
 Next Hop Self    : false
 Update Source IP :
 BFD Enabled      : true
 BFD Interval     : 0
 BFD Rx           : 0
 BFD Multiplier   : 0
 Default Originate: false
 Default Originate
 Route Map        :
 Add Path Capability : Receive
 Add Path Advertise  : Best 4
 Dev State        : provisioned
 App State        : cfg-in-sync
Dynamic Peer
-----------
    0 Records



    0 Records
===============================