Provision a Tenant Endpoint Group

You can provision a tenant endpoint group.

About this task

Complete the following tasks to provision a tenant endpoint group in your XCO fabric.

Procedure

  1. Create a Tenant Endpoint Group
  2. Update a Tenant Endpoint Group
  3. Show a Tenant Endpoint Group
  4. Delete a Tenant Endpoint Group
  5. Configure Network Property Description on Tenant EPG
  6. Enable or Disable ICMP Redirect on Tenant EPG Networks
  7. Update Anycast IP on an Existing Tenant Network
  8. Configure Multiple Anycast IP
  9. Configure IPv6 Neighbor Discovery (ND) on a Tenant Network
  10. Configure BFD Session Type for an Endpoint Group
  11. Configure Cluster Edge Port (CEP) Cluster Tracking for Endpoint Groups
  12. Configure Suppress Address Resolution Protocol and Neighbor Discovery on VLAN or Bridge Domain
  13. Configure Local IP for Endpoint Group
  14. IPv6 Anycast Gateway Support
  15. Software BFD Session Support on CEP
9037725-00 RevAA