Show a Tenant Endpoint Group

An endpoint group is a logical group of endpoints, which are devices that are connected to the network. You can specify such parameters as group name, the IP address, the port channels, the switchport mode, the BGP service type, native VLAN, CTAG range, the associated VRF, the Layer 2 and Layer 3 VNI, the bridge domain, and neighbor discovery preferences.

About this task

Follow this procedure to show a tenant endpoint group.

For syntax and command examples, see the ExtremeCloud Orchestrator Command Reference, 3.2.0 .

Procedure

To show a tenant endpoint group, run the following command:
efa tenant epg create --name ten1epg1 --tenant tenant1

Example