What's New in this Document

The following table describes information added to this guide for the ExtremeCloud Orchestrator (XCO) 3.2.0 software release.

Table 1. Summary of changes
Feature	Description	Link
Certificate Management enhancement Part 3	Describes procedure to update the password of a new user in XCO. Updated the third-party certificates Host Authentication certificates running on port 8079 Updated the renewal script	Change Password of efainternal User HTTPS Certificates Host Authentication Certificate XCO Root CA XCO Intermediate CA K3s CA K3s Server Certificate
BUM traffic Local bias support for LVTEP	Describes procedure to configure the Local Bias to handle the LVTEP BUM traffic.	Configure Local Bias for Handling the LVTEP BUM Traffic
	Describes procedure to configure or unconfigure logging and to customize the log files to fit system resources.	Logging Customization Configure Logging Unconfigure Logging
Tenant : EPG : Network : ICMP Redirect Enable or Disable : Release Documentation	Describes procedure to configure ICMP Redirect Enable or Disable.	Enable or Disable ICMP Redirect on Tenant EPG Networks
XCO Log streaming and filtering	Describes additional filtering capability of logging streams, notification terminology, additional notification filtering, and sub-filter commands.	Notification Sub-Filtering Terminology Additional Notification Filtering Sub-Filter CLI Sub-Filter Options during XCO Upgrade
Pure IPv6 Support in XCO	Updated the topic with dual IP mode supported northbound CLIs content.	Northbound IPv6 support
Pure IPv6 Support in XCO	Updated the topic with backup and restore content for IPv6 support.	XCO System Backup and Restoration
Configuration for IPv6 prefixes restricted to 64	Describes procedure to configure hardware profile to limit the IPv6 prefix to 64.	Configure Hardware Profile to Limit IPv6 Prefix to 64
Infra and deployment enhancements	Describes support for accessing supportsave without logging in to XCO.	Accessing Supportsave without Login
Inventory and Fabric Service Enhancements	Updated "Fabric Settings in Active Fabric: Small Data Center Fabric" and "Fabric Settings in Active Fabric: Clos Fabric" tables for BGP multihop. Describes procedure to update BGP multihop on an active fabric, fabric configuration using force option, and Linux exit codes.	Edit Fabric Settings Update bgp-multihop on an Active Fabric Fabric Configuration using Force Fabric DRC using Force Linux Exit Codes Linux Error Exit Code
BGP ADD-PATH	Describes procedure to configure additional paths on Tenant BGP peer and BGP peer group.	Add Path on Tenant BGP Peer Add Path on Tenant BGP Peer Group
Health Support for Fabric Service	Describes fabric and device health status with sample output	Fabric Health Device Health Operational State Health Sample Output of 3-stage Clos Fabric Creation
XCO Alarm Management	Describes the XCO alarms, alarm inventory, status change notifications, and alarm commands	Fault Management - Alarms Alarm Inventory Alarm Status Change Notifications Alarm Commands
Evolution of EFA and XVM to XCO	Describes the evolution of EFA and XVM to XCO	Evolution of EFA and XVM into XCO