Guidelines for isolating issues to
vSLX
To
isolate issues to vSLX (as opposed to SLX-OS), check if basic IP connectivity (ping) works
over the links:
- Boot up using simple L2 and L3
configuration and make sure that interfaces come up and that
ping works.
- Use vsh
commands to make sure that relevant nodes are powered on and that the console
connection works.
- Links require both SLX-OS interface-level configuration and vsh link-creation. If
links are down check both SLX-OS and vsh to make sure that the configuration is
correct.
General guideline
If basic connectivity does not work, it is most likely a vSLX issue. Otherwise, it is
most likely an SLX-OS issue.