Creating Links Between Ports

Use this task to create a virtual Ethernet cable between two supported devices.

1. Create the first link.
   

   (vsh) create link ch_9540_01 0/1 ch_9540_02 1/1
   

2. Create the second link.
   

   (vsh) create link ch_9540_01 0/3 ch_9540_02 5/1

3. (Optional) To verify link status, run the show link status command.
   

   (vsh) show link status
    Name           Port        Name           Port           Status
    .....................................................................
    ch_9540_01     0/1   <--> ch_9540_02   1/1            Right side down
    ch_9540_01     0/3   <--> ch_9540_02   5/1            All up