Setting the Management IP Address Using the Web Interface

To configure the management IP address on a 200 Series switch using the web interface, follow these steps:
  1. Log on to the switch using your web browser.
  2. Open the IPv4 Network Connectivity page: System > Connectivity > IPv4.
  3. Define IPv4 connectivity:
    1. In the Network Configuration Protocol field, click None.
    2. In the following fields, supply the appropriate values for the interface:
      • IP Address
      • Subnet Mask
      • Default Gateway
      • Management VLAN ID (the default value is 1)
    3. In the rest of the fields, accept the default values.
      Click to expand in new window
      Fields for Setting the Management IP Address
  4. Click Submit.
The switch's management IP address is set.