New in this Document

The following sections detail what is new in this document.

New Commands

The following commands are newly added to this document:

Auto-sense

Extended Evaluation License:

Egress Shaper for Fabric Extend Tunnels on Fabric IPsec Gateway

Multi-area SPB:

RADIUS Port and VLAN Based Attributes:

The following commands are updated in this document:

Table 1. Existing Command Updates
Command	Update
auto-negotiate (for the management port)	Added 5420 Series default.
boot config sio console baud	Added 5420 Series default.
delete ipsec	Added new parameter.
delete logical-intf-tunnel	Added new parameter.
filter acl ace ip	Added new parameter.
filter acl ace ipv6	Added new parameter.
ip ipfix aging-interval	Added 5420 Series to Usage Guidelines.
lldp	Added new parameters.
load-license	Added 5420 Series to Usage Guidelines.
poe poe-pd-detect-type	Added 5420 Series to Usage Guidelines.
set ipsec	Added new parameter.
set logical-intf-tunnel	Added new parameter.
show auto-sense	Added new parameter.
show eapol multihost non-eap-mac status	Added VSP 8600 Series to Usage Guidelines section.
show eapol status interface	Added VSP 8600 Series to Usage Guidelines section.
show ip igmp interface	Updated Example output and field description to include SNOOP ORIGIN.
show ip ipfix flows	Added 5420 Series to Usage Guidelines.
show lldp	Added new parameters.
software	Added new parameter.
sys mtu	Added 5420 Series default.
tx-flow-control	Added XA1400 Series default.

The following commands are removed: