web-server

Syntax

• default web-server [def-display-rows][enable][http-port][https-port][inactivity-timeout][password min-password-len][read-only-user enable][secure-only][tls-min-ver]

• no web-server {enable | read-only-user enable | secure-only}

• web-server def-display-rows <10-100>

• web-server enable

• web-server help-tftp WORD<0-256>

• web-server http-port <80-49151>

• web-server https-port <443-49151>

• web-server inactivity-timeout <30-65535>

• web-server password min-password-len <1-32>

• web-server password ro WORD<1-20>

• web-server password rwa WORD<1-20>

• web-server read-only-user enable

• web-server secure-only

• web-server tls-min-ver {tlsv10 | tlsv11 | tlsv12}

Command Parameters

def-display-rows <10-100>

Configures the web server default display row width. The default is 30.

enable

Enables the web interface. You must enable the web interface before you can connect to the system using Enterprise Device Manager (EDM).

help-tftp WORD<0-256>

Specifies the path to the TFTP server that stores the HTML Help files for the web server. WORD<0-256> is a string of 0-256 characters. Specifies the file name in the following format: a.b.c.d:/

http-port <80-49151>

Configures the web server HTTP port. The default is 80. To select another port for HTTP, you can discover the ports that TCP already use. Use the show ip tcp connections command to list the ports already in use, and then select a port that does not appear in the command output.

https-port <443-49151>

Specifies the HTTPS port of the web server. You can select a value of 443 or 1024 to 49151. The default is 443. To select another port for HTTPS, you can discover the ports that TCP already use. Use the show ip tcp connections command to list the ports already in use, and then select a port that the system does not display it in the command output.

inactivity-timeout <30-65535>

Changes the web-server login session inactivity timeout. The default is 900 seconds (15 minutes)

password {ro|rwa} WORD<1-20>

Specifies the username and the password for the access level. The access level can be read-only or read-write-all.

password min-password-len <1-32>

Configures the minimum password length. By default, the minimum password length is 8 characters.

read-only-user enable

Enables the web server read-only (RO) user, which is disabled by default after a software upgrade.

Note

read-only-user enable is available for demonstration purposes on some products. For more information, see VOSS User Guide.

secure-only

Enables secure-only access to the web server. The default value for the secure-only option is enabled. By default the web server is configured with the secure-only option, which requires you to use https to access EDM. To access EDM using http, you must disable the secure-only option, by using: no web-server secure-only. The default is enabled.

tls-min-ver <tlsv10|tlsv11|tlsv12>

Configures the minimum version of the TLS protocol supported by the web-server. The default is tlsv12.

Default

The web server is disabled, by default.

Command Mode

Global Configuration