mgmt vlan
Specifies management VLAN instance CLI mode.
Command Parameters
- <2-4059>
- Associates the management VLAN
with an existing port-based VLAN.
-
Specifies the
VLAN ID in the range of 2 to 4059. VLAN ID 1 is the default VLAN
and you cannot create or delete VLAN ID 1. By default, the
system reserves VLAN IDs 4060 to 4094 for internal use. On
switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if
you enable these flags, the system also reserves VLAN IDs 3500
to 3998.
- <MAC-offset>
- Associates the management VLAN with an existing port-based VLAN.
-
Specifies a number by which to offset the MAC address from
the chassis MAC address. This ensures that each IP address has a different MAC
address. If you omit this variable, a unique MAC offset is automatically generated.
Different hardware platforms support different ranges. To see which range is
available on the switch, use the CLI command completion Help.
Command Mode
Global Configuration
Usage Guidelines
The commands are not supported on VSP 8600
Series. For
more information about feature support, see VOSS Feature Support Matrix.
