Display non-EAP client MAC information on a port.
show eapol multihost non-eap-mac status
show eapol multihost non-eap-mac status vlan <1-4059>
show eapol multihost non-eap-mac status verbose
show eapol multihost non-eap-mac status vlan <1-4059> verbose
show eapol multihost non-eap-mac status vlan <1-4059> {slot/por[/sub-port][-slot/port[/sub-port]][,...]}
show eapol multihost non-eap-mac status vlan <1-4059> {slot/por[/sub-port][-slot/port[/sub-port]][,...]} verbose
None
User EXEC
This command does not apply to all hardware platforms. For more information about feature support, see VOSS User Guide.
The show eapol multihost non-eap-mac status command displays the following information:
Output field |
Description |
---|---|
PORT NUM |
Displays the port number in use. |
MAC |
Displays the MAC address of the client. |
STATE |
Indicates the authentication status of the non EAP host that is authenticated using radius server. |
VLAN ID |
Indicates the VLAN assigned to the client. |