ip igmp flush vlan
Use this command to flush Internet Group Management Protocol (IGMP) group members, the
multicast router and senders.
Syntax
-
ip igmp flush vlan
<1-4059>
-
ip igmp flush vlan
<1-4059> grp-member
-
ip igmp flush vlan
<1-4059> mrouter
-
ip igmp flush vlan
<1-4059> sender
-
ip igmp flush vlan
<1-4059> sender {A.B.C.D}
-
ip igmp flush vlan
<1-4059> sender {A.B.C.D} {A.B.C.D}
Command Parameters
- <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- grp-member
- Specifies a group member.
- mrouter
- Specifies a multicast router.
- sender {A.B.C.D} {A.B.C.D}
- Specifies a sender. The first IP
address specifies the source IP address of the sender. The second IP address
specifies the group IP address of the sender.
