Display the Internet Protocol Security (IPsec) information on an VLAN interface. The command only works on an interface where you enable IPv6. If you do not enable IPv6 on the interface, the command displays as an error to the user.
show ipsec interface
show ipsec interface vlan <1-4059>
None
User EXEC
The show ipsec interface vlan command displays the following information:
Output field |
Description |
---|---|
Vlan Interface |
Specifies the VLAN interface. |
Policy Name |
Specifies the IPsec policy that associates with the specific VLAN or VLANs. |
IPsec State |
Specifies whether the IPsec policy is enabled on the VLAN interface. |
Direction |
Specifies the policy direction. |