You must have a network location that
includes at least one building before you can draw a building perimeter.
It
is a good practice to define the building perimeter before you add internal walls,
windows, doors, and other RF obstructions. The perimeter helps estimate how much radio
signal passes outside the walls of the building.
-
Select Draw
Perimeter.
-
Select a corner of the building and drag to the next corner.
-
Before you reach the last
corner, double-select to close the shape and exit drawing mode.
-
To change the perimeter wall type, highlight the perimeter and select
Change Wall Type.
You can draw multiple
perimeters on the same map to define different buildings or buildings with open
spaces, such as courtyards. To draw a second perimeter on a map, select
Draw
Perimeter again and draw the new perimeter. You can draw
perimeters inside each other, or two or more non-intersecting perimeters. The
only invalid combination is a perimeter that intersects another
perimeter.
-
Select a wall type from the drop-down list.
-
To remove a perimeter, highlight a perimeter line and select
Remove.
The next step is
to add internal walls and obstructions to the floors in your building. See Add Interior Walls and Obstructions
