Your network hierarchy must contain at least one site before you can add
buildings and floors.
Use the following procedure to add a new building to your network plan,
and to upload building perimeters and floor plan images. ExtremeCloud IQ
stores the images in the image library for future use.
-
Go to , and select Add.
Alternatively, to add a new
building to an existing site, select the corresponding Add button for
the site.
-
Select the Building tab, and
enter a name for the new building.
-
Enter the building Address and
City,
and then select the State from the drop-down menu.
While sites do not require addresses, it is expected that buildings have
addresses.
-
From the Associated With
menu, select the global org level, or a site.
-
Select Save.
